非自伴情形下时滞抛物方程的惯性流形

利用Lyapunov-Perron方法在适当的谱间隙条件和适当小的时滞假设下,证明了一类非自伴算子情形下半线性时滞抛物方程惯性流形的存在性。     

A stochastic model for burn‐in procedures in accelerated environment

Burn‐in procedure is a manufacturing technique that is intended to eliminate early failures of system or product. Burning‐in a component or system means to subject it to a period of use prior to being used in field. Generally, burn‐in is considered expensive and so the length of burn‐in is typically limited. Thus, burn‐in is most often accomplished in an accelerated environment in order to shorten the burn‐in process. A new failure rate model for an accelerated burn‐in procedure, which incorporates the accelerated ageing process induced by the accelerated environmental stress, is proposed. Under a more general assumption on the shape of failure rate function of products, which includes the traditional bathtub‐shaped failure rate function as a special case, upper bounds for optimal burn‐in time will be derived. A numerical example will also be given for illustration. © 2006 Wiley Periodicals, Inc. Naval Research Logistics, 2006     

Transient analysis of Markov models of fault‐tolerant systems with deferred repair using split regenerative randomization

The (standard) randomization method is an attractive alternative for the transient analysis of continuous time Markov models. The main advantages of the method are numerical stability, well‐controlled computation error, and ability to specify the computation error in advance. However, the fact that the method can be computationally very expensive limits its applicability. In this paper, we develop a new method called split regenerative randomization, which, having the same good properties as standard randomization, can be significantly more efficient. The method covers reliability‐like models with a particular but quite general structure and requires the selection of a subset of states and a regenerative state satisfying some conditions. For a class of continuous time Markov models, model class C₂, including typical failure/repair reliability‐like models with exponential failure and repair time distributions and deferred repair, natural selections are available for both the subset of states and the regenerative state and, for those natural selections, theoretical results are available assessing the efficiency of the method in terms of “visible” model characteristics. Those results can be used to anticipate when the method can be expected to be competitive. We illustrate the application of the method using a large class C₂ model and show that for models in that class the method can indeed be significantly more efficient than previously available randomization‐based methods. © 2006 Wiley Periodicals, Inc. Naval Research Logistics, 2006     

战时装备调配保障决策模型构建研究

分析了战时装备调配保障决策的特点,运用模糊聚类分析法对装备调配保障对象进行了分组和优先级排序,以此为基础,运用目标规划法构建了战时装备调配保障决策模型,最后,通过实例验证了模型的可行性和有效性．     

基于最短拦截时间的异面拦截机动轨道设计与优化

本文构建了单脉冲机动在燃耗约束下的最短时间拦截轨道设计模型与求解方法,将用数学泛函求边值问题转换为高次代数方程的求解计算,并用牛顿迭代法进行快速寻根,仿真结果表明模型及算法准确、有效,满足精度要求。     

内编队地球重力场测量性能数值分析

内编队系统通过实现内卫星纯引力轨道环境和内卫星精密定轨,完成高精度地球重力场测量,实现了不依赖于加速度计的重力卫星实施新途径。针对内编队重力场测量性能难以解析分析的情况,基于MATLAB并行程序设计进行了重力场测量数值模拟,获得了内编队重力场测量的有效阶数及其精度。在内编队轨道高度为300km、内卫星干扰力为1.0×10-10m/s2、外卫星定轨精度为3cm、内外卫星相对状态测量精度为1mm的条件下,计算得到内编队测量重力场的有效阶数为72,相应的大地水准面累积误差为44cm,重力异常累积误差为4.5mGal,由此可知内编队测量重力场的有效阶数主要分布在低阶部分。     

基于组合赋权雷达图实现电网电能质量综合评估

将改进的组合赋权雷达图方法用于电网电能质量综合评估。对主观、客观赋权法组合,基于组合权重与原权重之间的偏差尽可能小的优化思想,求取雷达图中各项指标的组合权值。利用各指标对应的扇形区域的对角线作为指标轴绘制雷达图,不仅最大限度体现各指标的独立权重,也反映了各指标之间的相互影响。利用雷达图的面积和周长两个变量完成对电能质量的综合评估。最后通过应用实例,验证了论文方法的合理性和在电能质量综合评估中的有效性。     

基于联合相似测度的SAR图像边缘点特征配准方法

针对SAR图像配准过程中几何变换影响特征匹配稳健性和适应性的问题,提出了一种在特征匹配过程中直接解算几何变换模型的边缘点特征配准方法。利用SAR图像边缘点的梯度和方向特征,基于像素迁移思想,定义了图像匹配的联合相似度——联合特征均方和(SSJF),并建立了SAR图像边缘点集相似性匹配准则;基于方向模板提出了改进的ROEWA算子;利用改进的遗传算法(GA)来进行相似度的全局优化搜索,获取配准模型参数;利用多幅SAR图像的配准试验,对本文方法的性能进行了验证。     

基于行为建模的移动代理性能评估

针对移动代理的分布式应用性能评估需求,建立了移动代理生命周期中主要行为的网络负载模型和时间消耗模型.在3种典型分布式应用想定下,分析了基于C＼S模式和移动代理模式的应用实现基本过程,对两种模式下的网络负载和执行时间进行了仿真比较,结果证明了在访问节点数量较多,网络传输速率较低时,移动代理模式的具有更好性能.     

基于复杂排队系统的TOC服务模型与性能分析

三值光学计算机的运算请求处理过程缺乏合理、系统的性能评价标准与体系。基于M/M/1、M/M/n、MX/M/1和M/MB/1构成的复杂排队系统,构建了三值光学计算机的四阶段服务模型,同时建立了立即调度和结束时调度两种不同策略与算法。基于不同排队系统讨论了运算请求的接收时间、预处理时间、运算时间和发送时间的计算方法,进而得到最终响应时间。最后,通过仿真实验对两种策略的模型进行验证,结果表明结束时调度策略明显优于立即调度策略。